What Do You Know About Floors

What Do You Know About Floors

Tips to Refinishing Hardwood Floors.

There are many reasons as to why you should use hardwood flooring materials for your floor but also there is a responsibility that comes with the benefits. Like any other material, hardwood can wear out, therefore, meaning you will need sometimes to either replace or refinish them to their former glory. You should conduct some inspections to define if you will replace the hardwood flooring materials or refinish them. When it comes to refinishing your hardwood floor, you can decide to do-it-yourself or engage professionals to do it. Given in this article are some steps you can follow when refinishing hardwood floors.

For you to refinish the hardwood floor, you need to collect the appropriate materials. There are a number of refinishing materials you need to have before you start the process which can include the shop vac, shop rags, sandpapers, stain application pad, furnish foam rollers, oil-based stains and so on. If you don’t know much about purchasing this equipment, you can engage professionals for advice. To start the process of, you need to remove objects that are on the floor including carpet tacks and nails.

The next step to take is to sand the floor using 60 grit sandpaper and the belt sander. Sanding the floor using services of sandpapers and belt sander should be repeated more than once of which you use this shop vac to help you get rid of the debris and the dust.

After you have finished removing the dust in the debris, you should start water popping. Water popping is meant to get the wood wet to raise the grain. Primarily, water popping is willing to help in helping the wood absorb more of the stains. Water popping is possible by dipping the shop rag in water then using it to wipe the floor.

The next step is to stain the floor used oil-based stains and the stain applicator pads. After you apply the first oil-based stains, you are supposed to give it 24 to 48 hours to dry. Polyurethane is then applied after the oil-based stains have dried up using the foam roller of which you are advised to give at least two hours to dry.

Now after finishing the coating, it is time to buff the floor using the 220-grit screen. After you are done with the buffing, it is time you apply another coating of the polyurethane of which you follow the same process 3 to 4 times. At the end of the process. Therefore, you discover that you of a new floor. If you want to get more info on how to make the hardwood floor last long, there is a lot of info on the Internet.